How Billings Epoxy Coats Floors
Quick answer: Billings Epoxy’s process is inspect, mechanically prepare, repair, coat, and topcoat — then cure to the product’s drive-on window. Prep quality decides whether a Billings garage coating survives road salt and freeze-thaw. Call 406-719-6087 to schedule an on-site walkthrough.
What are the steps to install garage epoxy in Billings?
- On-site inspection: We look at moisture risk, existing coatings, cracks, oil contamination, and how you use the space.
- Diamond grinding / mechanical prep: Open the concrete profile so resin can bond — sweeping alone is not enough.
- Repair: Address cracks, joints, and spalls that would telegraph through the finish.
- Base coat: Apply the epoxy (or specified) body coat at the right film thickness.
- Broadcast (optional): Flake or metallic effects for look and traction.
- Topcoat: Clear chemical-resistant finish — often polyaspartic when faster return-to-service or UV stability matters.
- Cure & handoff: Respect walk-on and drive-on windows; review care tips.
Warranty language and prep expectations: prep & warranty. Climate context: cold-climate guide. Pricing context: cost guide.
How long does a typical Billings garage take?
Most two-car garages are measured in days, not weeks — but repairs, moisture mitigation, and product choice change the calendar. We give a project-specific timeline after seeing the slab.
What happens during the free on-site estimate?
We look at the whole slab: cracks, spalls, heaved or settled sections, old paint or sealer, oil saturation, and signs of moisture such as dark patches or white efflorescence. We also ask how you use the space (daily parking, a shop, a gym, storage) because that decides the build thickness and topcoat. You get a written scope that lists prep, products, timeline, and warranty terms.
Why diamond grinding instead of acid etching?
Acid etching is common in DIY kits, but it’s inconsistent: it can leave residue, doesn’t remove old coatings or sealers, and barely touches dense, smooth-troweled concrete. Diamond grinding mechanically removes the weak top layer and contamination and leaves a consistent profile the resin can grip. In a climate with road brine and freeze-thaw, that bond line is what keeps a coating from peeling.
How do you handle cracks and damaged concrete?
Cracks are opened up and filled, spalls and pitted areas are patched, and repairs are ground flush with the rest of the floor. A flake broadcast then helps camouflage the repaired areas. We’ll point out cracks that look active, since slab movement can still show through over time.
How should I prepare my garage?
- Clear the garage completely, including items stored along the walls near the floor
- Plan to park outside for the cure period we give you
- Make sure we have access to power, and let us know about floor drains or heating
- In winter, keep an attached garage heated before and during the install
What does a typical install schedule look like?
For many two-car garages, day one is grinding, repairs, and the base coat, and day two is the flake broadcast and topcoat. Heavier repairs, moisture mitigation, or cold temperatures can add time. Foot traffic returns before vehicles; we give you written walk-on and drive-on times.
Where we install
The same process runs on every job, from commuter garages in the Heights to shops and pole buildings in Shepherd and Huntley, and garages in Lockwood, Laurel, and Park City.
Install process FAQ
Do I need to be home during the install?
Not the whole time. We need access to the garage and power, and someone to walk through the finished floor and care instructions with us. We coordinate the schedule with you in advance.
Is grinding loud and dusty?
Grinding is loud, but we use dust-extraction vacuums connected to the grinders, so most dust is captured at the source. We seal off the doorway into the house.
What happens if you find moisture problems?
We explain the readings and options: usually a moisture-tolerant primer, and sometimes drainage fixes before any coating. We don’t coat over a problem that would cause the floor to fail.
How long before I can park in the garage?
It depends on the products and temperature. Foot traffic usually returns first; vehicles later. You get written walk-on and drive-on times before the job starts.
About Billings Epoxy — who we serve
Service-area business serving Billings and nearby Yellowstone County towns. Call 406-719-6087. Last updated October 2026.
Call 406-719-6087