Flake Epoxy Floors in Billings, MT
Quick answer: An epoxy flake floor (also called a chip or flake garage floor) is a pigmented epoxy base with vinyl flakes broadcast into it, sealed with a clear chemical-resistant topcoat. It is the most popular garage system we install in Billings because it hides grit, adds traction on snowmelt and cleans up easily. Call 406-719-6087 for a free estimate.
Montana winters track grit, sand, and road salt into Billings garages. Full-broadcast flake hides tire marks and dust while adding slip resistance on wet days — that is why it outsells solid color for daily-driver bays.
Why Billings homeowners pick flake
- Hides dirt between cleanings better than solid color
- Extra traction when snowmelt puddles under cars
- Wide color blends to match house trim or branding
- Pairs well with polyaspartic topcoats for faster return-to-park
Flake vs metallic vs paint
Want a showpiece swirl? See metallic epoxy. Still comparing DIY paint? Read garage epoxy vs paint. Climate context: cold-climate guide. Full garage overview: garage floor coatings.
How is a flake epoxy floor built?
We diamond-grind the slab, repair cracks and spalls, and apply a pigmented base coat. While the base is wet, vinyl color flakes are broadcast across the floor, usually to full coverage. After it cures, the loose flakes are scraped and vacuumed off, and a clear chemical-resistant topcoat (often polyaspartic) locks everything in. The result is a textured, multi-color floor that’s much thicker than paint.
Full broadcast vs partial broadcast
Full broadcast covers the base completely for the most texture and the best ability to hide dirt and repairs; it’s what most Billings homeowners choose for daily-driver garages. Partial broadcast scatters flakes over a solid color for a lighter look and a smoother feel, but it shows grit and tire marks more.
Is flake slippery when wet?
Full-flake floors have natural texture from the chips. For garages that collect snowmelt, we can add an anti-slip additive to the topcoat for extra grip. See the cold-climate guide for winter care tips.
Choosing a color blend
Mid-tone and darker blends hide road grit and dried de-icer residue best; lighter blends brighten the space but show more. Bring a photo of your house trim or cabinets and we’ll bring samples to the estimate.
Where we install flake floors
Flake is our most common system in Billings Heights, Lockwood, Laurel, Shepherd, Huntley, and Park City. Compare topcoats in polyaspartic vs epoxy and see the install process.
What flake size and blend work best in Billings?
Standard quarter-inch chips give the classic speckled garage look and hide the most. Smaller chips read as a finer, more uniform texture that some people prefer in basements and shops. For color, think about what your garage collects: in Billings that’s sand and grit from winter roads, white de-icer residue, and summer dust. Blends of gray, tan, and black hide all three; very light blends show grit and very dark ones show dust and dried residue. We bring samples to the estimate so you can see them under your own lights.
Flake beyond the daily-driver garage
Flake works well in shops and hobby bays where tools get dropped, in mudrooms and laundry rooms that see wet boots, and in basements where you want an easy-clean surface that doesn’t look industrial. For heavy equipment, fuel, and hydraulic fluid, we step up to a higher-build commercial system; for a glossy showpiece bay, see metallic epoxy.
Flake epoxy FAQ
How long does a flake floor take to install in Billings?
Most one- to three-car garages take one to three days, depending on repairs and temperature. Foot traffic returns before vehicles, and we give written walk-on and drive-on times for your products and conditions.
Can flake go over cracked concrete?
Yes, after repair. Cracks and spalls are filled and ground flush before the base coat, and the flake pattern helps hide the repairs. Cracks that are still moving with the slab can show through as a thin line over time.
How do I clean a flake floor after winter?
Squeegee meltwater out, rinse away de-icer residue, and mop with a pH-neutral cleaner. Doing that every few weeks during de-icer season keeps the topcoat looking clean.
Does flake hide tire marks?
Much better than solid color. A full broadcast with a quality topcoat resists hot-tire pickup, and the multi-color pattern disguises everyday scuffs and grit.
What are epoxy floor flakes?
Epoxy floor flakes are thin, colored vinyl chips that are broadcast into a wet epoxy base coat and then locked in with a clear topcoat. They add texture and color variation that hide dirt and small imperfections.
Can I buy epoxy flakes and do a flake floor myself?
Flake blends are sold by coating suppliers, but most DIY failures come from prep: the slab needs diamond grinding, crack repair and a moisture check before any coating. See epoxy vs paint and our install process.
Where can I get an epoxy flake floor near me in Billings?
Billings Epoxy installs flake floors in Billings, Billings Heights, Laurel, Lockwood, Shepherd, Huntley and Park City. Call 406-719-6087 for a free on-site estimate.
About Billings Epoxy — who we serve
We coat garages across Billings, Laurel, Lockwood, the Heights, Shepherd, Huntley, and Park City. Call 406-719-6087. Last updated October 2026.
Call 406-719-6087